Sunday, August 2, 2015

New Mexico, Utah, Colorado: Part II

Moab, Utah was a great experience on this trip.There are many roads around the area that make for a great ride and the scenery is phenomenal. We stayed here for 2 full days after arriving so we could visit Arches National Park and Dead Horse Point State Park which is known to have some of the most stunning sunset vistas  in America.

We paid for a guided tour by a Park Ranger in Arches National Park called the Fiery Furnace. The hike is considered one of the most extreme guided tours the park offers and along with that came some great scenery, history, and science. We also made sure to ride out to Dead Horse Point to capture a sunset.



We spent some time in Moab on Main Street during the heat of the afternoon visiting local shops, eating at the local restaurants, and seeing the museum. This gave us some down time to relax while the heat was at its highest to keep us cool yet active.

We left Moab, Utah to begin our journey home. This would take us through Grand Junction, Co and to the Grand Mesa Scenic Byway which would take us to an elevation of over 11k feet above sea level. As we neared the highest elevations snow covered the ground and the temperature plunged. It was quite a day of riding to think we left Moab with the temperature at over 100 to ride into the mountains and have snow. We stopped in Cedar Edge, Co where we had reservations at a lodge for the night. This would be the last day of our trip where we were taking our time on back roads and spending extended time at various sites along the way.



There were still great roads along the way home though. US-92 and US-50 took us through some fantastic mountain scenery, lakes, and winding roads. CO-114 followed a river through a valley with tall walls on both sides and then out to some incredible high plains views and cool air at higher elevations. We also stopped at the Great Continental Divide at over 10K foot above sea level on CO-114 to take pictures since we don't have a Continental Divide where we live. During this part of the ride Margaret was suffering from a touch of food poisoning from a place we ate at in Cedar Edge. We would pull over at every road side stopping area so she could empty out. At one quiet place in the river valley while she was in the restroom I was wandering around looking at the scenery and saw a small paper bag on the ground. I figured I would be a good Samaritan and pick it up to throw it away to keep the place clean. To my amazement the bag was filled with rolling papers and a green medicine bottle that contained half an ounce of prescription marijauna! Funny to think we were in Colorado where its legal and just happen to find that. I'm sure whoever lost it wasn't happy about it though. I emptied the herb into some bushes and threw the rest of the stuff away. I didn't want it to possibly fall into the hands of children who may stop at that rest area later on.

It took 2 full days to get home from Cedar Edge Colorado. The first day was very cool for the entire day. The mountainous roads were cool and there was a good chance of rain for most of the day which kept it overcast. We only got rained on once for about half an hour so it turned out to be a nice day of riding. The second day however was grueling. As we came back into Texas the heat climbed back up and by the time we got home we were exhausted.

This was the first trip on my new FLHXS and the bike did well. There were a few issues though which can be expected since it only had 1100 miles on it when we left. Again I took tools as always and was able to repair everything along the way. This video: Tools for the Road will help if your interested in keeping a decent set of tools while saving space. The trip button stopped working during our stay in Cortez, NM and I think it was due to dust getting into the control housing from the dirt road we had to ride on every day to get to the places we wanted to visit. I pulled the housing apart one evening and cleaned it out well, pulled the ECM and battery leads to reset it and it began working again. The infotainment center blacked out completely one time. I didn't do anything to fix that. We stopped to eat, came out, it came back up and has been working ever since. The forward shift linkage came loose and was almost spinning on the shift shaft. I found that in Moab when we were washing clothes and our bikes. I hit it with the pressure sprayer and it flopped around. At the same time I found my rear brake pedal was also loose on the shaft so I was able to tighten both up. The last problem I had was the rubber mount for the exhaust under the saddlebag slid out and the exhaust began rattling in the bracket. The rubber fitting had been put in backwards from the factory so I repaired that along the way and haven't had any problems with it since then. Not too bad for a new bike on its first trip with such low mileage and hardly any real break in or road time.


It was a great ride and it was sad for it come to a close. I want to give a huge Thank You to  J-Man on YouTube who's video on Utah Rt 128 Scenic Byway (which we rode) inspired us to make this trip.







Thursday, July 9, 2015

New Mexico, Utah, & Colorado: Part I

For the past 8 months we prepared for a 2 week ride to New Mexico, Utah, and Colorado. We booked and paid for rooms in advance as we prepared our route. Any extra income was saved and taken in cash that we used for meals. By the time we left the entire trip was paid for with the exception of fuel. That makes for a worry free get a way to not have to worry about paying off credit cards or being in dept after the vacation is over with.

The first day was a hard ride from Fort Worth, TX to Artesia, NM where we would spend 2 full days visiting specific places we had wanted to see. Along the way a bee hit me in the face and left its stinger in my forehead. I finally had to pull over because it burned so bad and when I pulled my helmet off the bee fell out. It had hit me, stung me, then somehow crawled up inside of my helmet. All we had that could relieve the burning was some cortizone which we applied and moved on.

This part of the ride wasn't very scenic in the concept of beauty. Once we crossed into New Mexico and headed into the desert areas the landscape was saturated with oil rigs and natural gas drilling. Rigs dotted the horizon as far as the eye could see which in itself was quite incredible. The smell of gas and petroleum was overwhelming at times and I tried not to inhale too deep to keep it out of my lungs as much as possible. Seeing and smelling this remarkable industry made me more aware of the enormity of the petroleum and gas industry as well as our reliance on it.


We arrived in Artesia, NM and used that town as our base for the next 2 days of sightseeing. Roswell, NM was our first stop where we spent the day riding and visiting the alien museum and other alien related attractions that we discovered. The following day was spent in Carlsbad Caverns. This made for a wonderful cool day inside the cave and kept us out of the heat. We took our time through the cavern and Margaret had the great idea to hike back out instead of using the elevator. The mile plus hike out was steep and exhausting. It took us 45 minutes to make the climb and when we got back to the visitor center we were so hot we decided to take the elevator back down into the cavern where it was cool to rest. We stayed down there for a couple hours and gazed in wonder at the formations while we cooled down. As dusk neared we took the elevator back up so and headed for the entrance of the cave for the bat swarm viewing. Those things come swarming out of that cave by the thousands and its quite a site to see. A thunderstorm was moving towards us with brilliant flashes of lightning and the roar of thunder and the thought of riding back at night in the rain was not looking positive. We put our rain gear on in preparation for the storm and incredibly made it back shortly before the storm hit.



The next couple days we spent riding scenic routes and back roads to get to our next destination at Cortez, CO where we would stay for another few days to see the sights in the area. As we exited to the final road where the lodge was located the road turned into gravel. We had to ride 10 miles on that gravel to get to our lodge due to construction that had begun the previous month. It was awful and since we were staying there for 3 nights it meant a 20 mile ride on gravel every time we left the lodge. We decided to 2 up since Margaret wasn't comfortable riding in that type of surface. It also saved us a lot in fuel to leave her bike at the lodge. During this part of the trip I think dust got into my trip switch because it stopped working. I pulled apart the control housing one evening and cleaned it out but still couldn't get it to work. I also reset the ECM and electronics by removing the battery leads but that didn't work either. Since the only effect the trip meter had was  not being able to flip between odometer readings I wasn't worried enough to try and get it repaired.

While in Cortez, CO we spent 2 days seeing the various Indian cliff dwelling ruins at Mesa Verde National Park and went to Hovenweep Castle to see the ruins there as well. Neither of us had ever seen any of this history and it was something we both had always wanted to visit. It was absolutely remarkable to think of how the native Americans constructed these dwellings and the environment they lived in with so little water and extreme weather conditions. There was a lot of hiking involved during these 2 days and it made for a nice change from riding.



During our trip we were fortunate to see the desert in bloom. The locals told us they had finally come out of a 10 year drought which was causing the desert areas to bloom with an incredible variety of foliage and flowers. We took pictures of some of the flowers and plants since rainfall doesn't happen with much frequency to cause the blooming. This made for an unexpected yet pleasant surprise and addition to the ride.

After Cortez we headed into Utah to ride UT-95. It is a Scenic Byway with incredible views for over a hundred miles. This also took us past Natural Bridge National Monument so we made the stop to see the first sandstone arches of our trip. This was also our hottest day we had experienced during the ride so far. Because it had been raining and somewhat overcast, up to this point the riding was somewhat comfortable. And we had only gotten caught in the rain once and even then only for a few miles along the road. Now however we were in full sun, desert region, no rain, hardly any clouds, and no towns for miles. It was beautifully remote and scalding hot at 110 degrees. We rode 10 hours in this from Cortez to UT-95 into Hanksville, then onto UT-24 and finally pulled into our hotel in Moab, UT. It was quite an experience though and were both glad to have done it. The weaving canyon roads carved out by small streams and breaking out into endless miles of barren desert were fabulous. To ride for hours and never reach the horizon you see in front of you is an experience I will never forget. 




This marked a couple days past the halfway point of the trip. I'll break this trip into a couple parts and continue the journey on the next post. If your interested in the route we took here are the trip directions in a PDF format: New Mexico, Utah, Colorado. Hope you enjoy!





Thursday, June 11, 2015

Getting the New Bike Setup

It didn't take long to know I was going to need new handlebars on the bike. We took a couple rides and the stock bars were so low that I had to reach downwards to get a grip on them. Soon after my shoulders and back began to hurt from the awkward reach. Something had to be done.
I went with the Paul Yaffe monkeybars again because the pullback and width fit me well when they were on my 2012 Street Glide. This time I put the 10" bars on instead of the 12" though. Doing this kept the hand grips behind the fairing which keeps my hands from being exposed to rocks and wind. This will help in winter riding for the cold too. They are still high enough to allow enough pull back to keep from having to reach downwards like the stock bars. And they still look nice too.

The process of installation was much easier on the 2015. Harley made marked design improvements that affected many areas of the new bikes. Fortunately some of those improvements also affected modifications to the bikes making the task easier. Installing the handlebars is an example. They put longer brake lines and hydraulic clutch lines from the master cylinder so you don't have to replace those as long as your only putting 12" or lower bars on the bike. They also made a wiring junction on a plate that is mounted under the radio. The wires in this junction are able to be removed from the zip ties that hold them and re-routed back towards the handlebars which allows you to put up to 12" bars on the bike without having to cut and solder extensions. Even the removal of the inner fairing was made easier with the new style of fork mount that allows you to simply lift upwards then back after removing the turn signals, turn signal bolts, and accessory console. That also makes adjusting them later much easier and quicker without hardly any tear down.

I did a video on the process and as mentioned for the 2012 model you need to have some mechanical and electrical aptitude to successfully accomplish the install. Even though its easier to install bars on the 2014 and 2015 models, its still not going to be for everyone. Safety is the first goal when doing something like this and not performing even one task correctly could put your life at risk on the road. If there is any hesitation about doing the installation yourself, then you probably should let your dealership do it for you.

Stock Handle Bars


Paul Yaffe 10" Monkey Apes



How to Install 10" Paul Yaffe Monkey Bars on a 2015 Harley Davidson Street Glide Special




Sunday, May 24, 2015

Time to Move Along

Since beginning this blog I have written articles from a wide variety of subjects always trying to keep each write up riding related in some manner. Margaret even became part of the posts upon learning to ride and now is well part of this blog. From the beginning I started the blog to share in riding activities experienced on my Street Glide. During the blogs lifetime I went from 25 miles on the odometer to 62,908 on my bike. It has been the iron horse that carried me through every post. The same bike is what encouraged the maintenance page and was the star that began and played in my UTube channel on How to Maintain a 2012 Harley Street Glide.

That 2012 Street Glide has been a fantastic and reliable bike. It has had its share of breakages but never left me stranded. Due to my past work commute I would put 600 miles each week on it and then add whatever riding activity on the weekend to that mileage. It has seen its share of weather conditions, back roads, dirt roads, highways, and states across America. It had evolved from the stock Street Glide off the showroom floor to what it is today.


Now that I am working only 9 miles from home and left that hard commute behind the miles began slowing down. I had to consider the fact that at nearly 63k miles the depreciation was already beginning to hit the bike hard. At 75k you cannot extend the warranty any further on a Harley and I will hit that mark in a short amount of time, especially after our vacation ride this summer. Even though the bike rides as solid as it did when it was first purchased I decided to begin looking at trading it in to begin anew.

At first the numbers just didn't come together on a new bike. The mileage was the problem. I eventually just gave up and decided to dig in with my bike for the long haul. About 2 weeks later I got a call from our salesman Race saying the dealership owner wanted to make the trade happen. At first I was skeptical, after all, they weren't able to do it over the last two weeks, why now?. Within minutes Race called back, asked me to come up to his office so we could talk. Since I work at the dealership I headed that way to see what they had in mind. I never would have expected the extent of the offer.

I sat down, Race looked at me and said, "Not only are we paying your bike off, were giving you more than you owe". What?! I never would have expected that! Not with the mileage on the bike. Then he asked me how I wanted to use the money from my extended warranty. I had purchased 4 years additional at the time the factory warranty ran out. That extended service plan can be rolled into a new bike or the remaining balance can be applied as a down payment. So I applied it as a down payment. They also made an excellent offer on 5 years extended warranty which was far less than I paid for the 4 years I had on my previous bike so I added that as well. And to top it off I upgraded to a Street Glide Special as well!

I had to comment on this whole ordeal because it was the fairest offer I have ever received in the motorcycle or automotive industry. Fort Worth Harley Davidson went far beyond what anyone could have imagined and treated me very well. They genuinely want to get you on the bike your wanting and will go to great lengths to make that happen. If your shopping for a new bike I would encourage you to give them the opportunity and see what they can do for you.

I was able to swap some of the parts from my 2012 to the 2015 Street Glide which was nice. I didn't have time to remove the handlebars though so I ordered new ones and when I get some time we'll put a video up of how to install those on a 2015 since there are some differences. For now though, its time to ride!

My new 2015 Street Glide Special (FLHXS)




Wednesday, May 13, 2015

How to Install a Front Fender on a 2012 Harley Street Glide

This post finalizes the procedure of removing and installing a front fender on a 2012 Harley Davidson Street Glide. As mentioned in the post on how to remove the fender, mine suffered damage at an event from somebody that didn't have the decency to even leave a note apologizing for their carelessness. As in all aspects of life there are people who simply look out for themselves even if they are the cause of problems for others. Those people don't have the honesty or integrity to admit to those they affect as being the cause of the swath of destruction they leave in their wake. Oblivious to the world and people around them, they take for themselves, look out for themselves, and will not take responsibility if the outcome will affect them in a negative manner. This was the type of person that caused damage to my bike.

Fortune however smiled upon my situation as being the innocent victim in this case. A very talented and honorable man saw my plight and offered his assistance. He repaired my fender and had it back to me completed within 4 days! The work was stunning showing his perfection of his trade. You could look into the beautiful gloss black seemingly forever. The reflection was deep and the paint was smooth and without flaw. Juan is a true professional in his trade and I am grateful to know him and entrust paint work to him.

Thank you Juan for taking care of my fender situation and showing there are people with integrity and honor that believe in helping others. I would recommend him to anyone that needs paint and body work done on their bike.



How to Install the Front Fender on a 2012 Harley Davidson Street Glide